Home › Forums › Motorcycle Tech Talk › k1100rs lost lights

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Eugene Bajema
    Participant
    09/03/2009 at 9:51 pm
    Post count: 2
    #2931

    I have just had my headlights, indicators, park lights and horn cut out. My brake light will go as well as my hazards and the fuses are all good, think maybe the switch might have a prob or the wiring is broken somewhere, anyone else have any thoughts, tips help?  😐

    Murray
    Participant
    10/03/2009 at 2:56 am
    Post count: 487
    #11948

    Sounds like a relay fault. Swap out the ignition and headlight/horn relays (they are the same), if you still have ignition then the relay is the problem. From memory the headlight/horn relay is the one at the bottom right of the relay block under the seat as you are looking toward the front of the bike.Otherwise, check the earth from the wiring loom to the frame and the battery earth connections. If still no luck, start looking for a spot where the loom or exposed wires could be rubbing on the frame.Let us know what you did when you solve this.CheersGarry

    Eugene Bajema
    Participant
    13/03/2009 at 1:53 am
    Post count: 2
    #11949

    Looks like the headlight switch, is there anywhere i can ge a diagram to dissemble and reasemble (spelling is bad lol) the headlight switch?

    Murray
    Participant
    13/03/2009 at 4:24 am
    Post count: 487
    #11950

    HiGo here http://www.ibmwr.org/ktech/headlight-switch4.shtmlGood instructions, pictures to go with it - just click on the individual links in instructions.Have fun.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.