Home › Forums › Motorcycle Tech Talk › Cylinder Head Removal

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Inactive
    16/05/2007 at 5:22 am
    Post count: 5
    #2053

    Hi,Talked to a guy about getting the cylinder head welded, but first I have to take it off! Has anyone got any top tips on how to go about this?Thanks

    janejohnstewart
    Participant
    17/05/2007 at 9:31 am
    Post count: 96
    #7747

    What are we talking about here, Oilhead, Airhead, or gawd forbid, a brick?If it's an Oilhead, then have a look on the UKgser forum Tech section.  Steptoe has a detailed description of taking the heads off an 1150 (I think) ... lots of photos.If it's an Airhead, there are a few PDF copies of the workshop manual flying around the place.  Send me a PM if you need any guidance where to look ... If it's a brick ... sorry, not a clue, but I do have a range of hamers you could borrow ...  😀

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.