Home › Forums › General Discussion › 2008 F800 Gs recall

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Mohammed Mahdi Essop
    Participant
    25/03/2009 at 10:42 pm
    Post count: 21
    #2950

    BMW F800 GS RecallBMW has issued a recall for 2008 BMW F800 GS motorcycles for a problem with axle shaft wall thickness. Please read the details below.Not sure if this applies to NZ but I thought I would post it anywayManufacturer: BMW of North AmericaModel Year: 2008Models affected: F800 GSNHTSA Campaign Number: 09V088000Problem: BMW is recalling model year 2008 F800 GS motorcycles. The axle shaft wall thickness may not have been manufactured according to specifications. If the wall thickness was not sufficient, the axle shaft could deform and could break increasing the risk of a crash.Corrective Action: Dealers will inspect the axle shaft assembly and replace or repair the necessary components free of charge. The manufacturer has not yet provided an owner notification schedule. Owners may contact BMW

    Anonymous
    Inactive
    02/04/2009 at 9:36 am
    Post count: 32
    #12070

    Experience BMW are now recalling the F800GS 's for a replacement – had the callup this week. I read a blog about this some months ago on another website. Waiting for the modified part to arrive, so meanwhile probably best not to 'jump' the bike! Peter

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.